Wilhelm's latest activity
-
Lots of good info up above here. Wilhelm has pretty much covered everything. I'd start with looking at the oiler hole in the bar. Some... -
Menards is about two miles away from me and Lowes is across the road from it .TSC is another half a mile if that .I've actully got the...
-
Wilhelm replied to the thread Torx tools.Your living space - piece & quiet, You are Your own Boss on Your land Palm Beach - (I guess) an ant hill, obey to made up HOA rules I...
-
Wilhelm reacted to Powerstroke Cowboy's post in the thread SOLD CLEAN Makita 6100 PHO STOCK. with
Like.
Bump for a price drop. First post updated with new price. -
Wilhelm reacted to Powerstroke Cowboy's post in the thread SOLD CLEAN Makita 6100 PHO STOCK. with Like.
K095 is the rail mount for the 6100, so yes, small Husqvarna.
-
Wilhelm replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Cut the SLR out and enlarge the OEM exhaust outlet hole. Retune carb to just shy of the coil limiter and enjoy the power pickup.
-
Wilhelm reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I never heard of a dual-switch option, therefor I'd assume a custom modification.
-
Wilhelm replied to the thread Dolmar PS-7300 oiling rate.If Your saw is leaking oil under the clutch You will notice it best by checking the clutch drum. If the drum is oily on the inside , its...
-
I'll check usage and behaviour on the next round of cutting and consider the viscosity, we're in a frost free temperate area, so no...
-
My 7901 consistently uses slightly more fuel than oil, which is how I like it, when it was a 6401 I turned the oiler down as it was...
-
Wilhelm replied to the thread Dolmar PS-7300 oiling rate.BTW, I love Your saws spikes! :cool: Aka.: Star Trek, Klingon, Bat'leth
-
Wilhelm replied to the thread Dolmar PS-7300 oiling rate.Very kind of You, but there are members here with notably higher Dolmar seniority than my sorry self. :beer-toast1:
-
Wilhelm replied to the thread Dolmar PS-7300 oiling rate.Judging from the picture the oil might be seeping from under the clutch and then gets flung around under the clutch cover. I'd check...
-
I've picked up a Dolmar PS-7300 in great condition that's only been used as a homeowner firewood saw. The oiling rate was very light, if...
-
I had to turn back the oiler on my 7910 as it would run out of chain oil before motor fuel. 28” bar. The photo looks normal to me! I...
