TX_Welder's latest activity
-
Last old saw I bought came with a couple of chains. At a glance they looked like they had a lot of meat left on them. Turns out they... -
TX_Welder replied to the thread Saw builders chime in..I hear neighbors around me now and then, and you can hear their saws just screaming in the cut from dull chains. Makes me cringe.
-
Before parts became unavailable for the 346 chassis, I built quite a few hybrids on 345's & 350's with OEM 44.3mm top ends. If parts...
-
If everybody mastered carb tuning and chain sharpening, the parts and repair industries would be in serious trouble.
-
And the other kind... On another forum, a guy was having trouble with a new saw. When i mentioned adjusting the carb, he threw a...
-
I see both sides also but I’m after dead nutz reliability.
-
261’s old will be an all new saw coming soon. Scott likes the mtronic himself better also from a performance standpoint anyway. From...
-
Great saw except I’d want one without screws personally
-
Go ahead and shut this one down, I present peak 50cc greatness.
-
I gained 1500+ rpms in the cut by switching from a stock flocked 026 filter to a fine mesh 260 pro filter. I had to modify my top cover...
-
The maxflo is in the testing phase atm - should be out soon for the 462c and 400
-
TX_Welder replied to the thread Saw builders chime in..Need somebody that's crafty with a 3D printer to make something like a maxflo for it. Maybe use the new style filters?
-
TX_Welder replied to the thread Saw builders chime in..From what I gather watching his videos, the quad port is just a better more efficient design. More efficient burn, more power. Time for...
-
TreeMonkey won't steer you wrong.
-
