trooney's latest activity
-
trooney replied to the thread WANTED 064/066 Clutch Spider and Shoes.No, don't have one.. -
trooney reacted to jacktheripper's post in the thread WANTED 064/066 Clutch Spider and Shoes with
Like.
Thanks! -
trooney replied to the thread WANTED 064/066 Clutch Spider and Shoes.I'll look tonight. Can't promise anything. I know I've got two flywheels and some other stuff but might have a clutch..
-
trooney reacted to jacktheripper's post in the thread WANTED 064/066 Clutch Spider and Shoes with Like.
My 064 clutch is worn out. Shoes are loose on the spider, and the spring holes are wallowed out. Causes the clutch to engage at 2200...
-
trooney replied to the thread The Husky 42/42 special/242/246 thread.I definately like my 42 Special. It cuts real good and its light. I found me a new limbing saw. I like it better than the 254 I had.
-
trooney reacted to jacktheripper's post in the thread The Husky 42/42 special/242/246 thread with Like.
The 242 that I just got has a ks cylinder on it, and it is putting out 200 plus PSI with the base gasket. How common is this? It really...
-
Verified
-
He’s fine when everything goes right but he’s an *a-hole as soon as there’s a problem
-
trooney replied to the thread WANTED Stihl MS440 gas tank.I thought we had a deal made a long time ago...
-
I turned a few sockets in the lathe.
-
Darn, so much good advice here, something new for me. Now I know why they told me a long time ago, never part away with your old beat...
-
And also me. I put the socket on the end of an extension when I was close to done to kind of even out the grind, but other than that...
-
Me too - I had to make a couple for the MS-241s.
-
Exactly what I did :p
-
Get a cheap 8mm or 5/16 deep 1/4 drive socket. Chuck the socket up in a drill and turn it down on a bench grinder. Just go slow with...