Tor R's latest activity
-
Ah, will check -
What barrel?
-
The inside part of the carburetor leading up to the venturi.
-
This may sound silly, but without the benefit of having it in my hot little hands... how is the polish on the barrel?
-
Kits didn't have new springs so reused the old one, needle is exactly the same. Button is exactly the same. The saw may be possesed...
-
I run a wire from a repair tag down into those as far as I can.
-
By top passages you mean the mix needle passages? Usually corrosion doesn’t affect them as much because they aren’t sealed like the pump...
-
This Remington SL11 was pumping a lot of air and very little oil. The pickup in the tank was pretty plugged and the line from the oil...
-
Whether to save it or not depends on how rare the carburetor is. Hitting that with a sandblaster and polishing the face would bring it...
-
Hmm....don't think I can salvage this one :( Way too much corrosion.
-
They are mirror polished when made, and while they won't remain so forever, a dull look is okay, but a rough "weathered" finish could...
-
Well...it seems to like a fleese filter rather than the fine mesh. 10-10,5 in the cut without any pressure added. 18" maple...
-
they look normal to me. can try a nos filter as well.
-
As far as AM kits go, sometimes things like the little button on the inlet diaphragm being present or not can be an issue. If a...
-
There tou can see it.
