Tor R's latest activity
-
That is an incredible setup. Here's my much worse looking sharpening rig Features include, Poor quality Oregon knock off grinder Some... -
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with
Like.
Thanks Duane, I have plenty of chaos, I just don't post pics of it! I have scratcher chain on a BLK, but that is the only example I... -
Tor R reacted to Duane(Pa)'s post in the thread Chain Service Tools and Sharpening Station with
Haha.
Very organized. Let me know if you need any chaos. I have plenty on my bench! -
No, this was so off the top of my head one of the examples where such a head angle error is a nuisance to the operator. As I wrote, when...
-
Tor R reacted to Philbert's post in the thread Chain Service Tools and Sharpening Station with Like.
Old school chain. Still used in some industrial applications. Might see it on some antique or collectors’ saws. Philbert
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
el33t, I will check and see if my USG is square at zero. I have never had to sharpen a scratcher tooth chain. Not used here in USA as...
-
Just for the record the B scale is not in degrees. It is without units. But in fact, one unit on the scale B means an offset of one...
-
Have you ever checked that if you set 0 on the A scale the grinding wheel is exactly perpendicular to the vise? It doesn't matter so...
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
I have used the 15 degree setting for the last 25 years and never had a complaint, even had more than one occasion where I was told the...
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
el33t, here is a pic of both of my USGs and it looks the same to me as yours does. Can't say as I have ever had a problem.
-
Thank you very much for your reply. I really appreciate it. IMHO the last 2 charts (10/2024 & 03/2025) make more sense in terms of the...
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
el33t, you are right, they are labeled different, and I went back to an even older chart to compare more. The top pic is A03 with the...
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with
Love.
cus_delexe, I have 2 BP1 saws, one is complete with the bar and the sharpen on the saw chain and runs, the other is rough. I am still in... -
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Like.
el33t, attached is the most current spec chart with color codes that match the labels on the grinding wheels. You set the B to + or - 15...
-
Tor R reacted to stihl #1's post in the thread Chain Service Tools and Sharpening Station with Love.
This is the sharpening setup, on casters. This side has a grinder setup for 0.050 gauge chains and a hand filing jig. This side has a...