tallgrass_coyote's latest activity
-
Ttallgrass_coyote reacted to hacskaroly's post in the thread Looking at upgrading and would welcome advice/opinions. with
Like.
The 261 is a great saw with its power to weight ratio. Carb vs. C-M ends up being personal preference, if you like to adjust carbs (or... -
Ttallgrass_coyote reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
If majority are 6-10” cedars the 261 is plenty fine and a bigger saw won’t even seem that much faster honestly. Even a 24”+ won’t make...
-
Ttallgrass_coyote reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
You’ll be just fine on 24” cedars with an ms 261c and a 20” bar. Get one with a .050 light 04 20” and run the narrow kerf rs pro .325 on...
-
Ttallgrass_coyote replied to the thread Looking at upgrading and would welcome advice/opinions..Thanks for replying. I definitely thought about going bigger, but I need to prioritize maneuverability and stamina. Are thinking not...
-
TTig weldded up the head I cut off last night. When I faced and turned it to cut the chamber and seal area, full of porosity. Have done a...
-
Ttallgrass_coyote reacted to Stihlalltheway's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Elastostart is very different from the easy start, just a stretchy rubber part on the pull cord that makes life a little better...
-
Ttallgrass_coyote reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Have several standard carb 261s run a 16" B&C and have no complaints for a 50cc saw, I tend to run short for cc bar and chains. Good...
-
Ttallgrass_coyote posted the thread Looking at upgrading and would welcome advice/opinions. in Chainsaws.Had a seasonal job after college working for the state wildlife agency. Main job was to kill trees (girdle+tordon). My boss bought a...