STOVE's latest activity
-
Ran these four today. The 61, 041, and 031 are running like champs. The 450 was running good, but now it decided not to oil. I’ll have... -
STOVE replied to the thread My 290-390 conversion thread.Finally got the bar stud out today. Had to cut new threads on the top half. I will start grinding in the top end, and finish the...
-
STOVE replied to the thread My 290-390 conversion thread.Case and tanks will be getting a cleaning once the stud is removed.
-
-
STOVE replied to the thread My 290-390 conversion thread.Updates. Got some of the parts clean, top end and crank removed. Had to soak the jug bolts in PB overnight. Ran into our first fiasco...
-
-
A friend of mine texted me a photo of a ms290 he found cleaning out his parents house after they passed. I was gracious to have any saw...
-
-
STOVE replied to the thread First time modifying a cylinder.Should I be concerned with the little booger and the round marks in the top of my chamber?
-
-
STOVE replied to the thread ECHO Echo, Echo, Echo.Here’s a dumb question. The echo decomp plug comes with 4 copper washers. Am I replacing that washer every so often or only if I see a leak?
-
STOVE replied to the thread Thick and durable handle wrap?.Bike bar tape, lizard skins baseball bat wrap, tennis racket wrap. The latter two won’t last forever but are cheap enough to replace often
-
-
STOVE replied to the thread First time modifying a cylinder.The jug kit came with a set of pins, the pop up did as well. What is the difference in shapes? From what I understand the OEM Stihl...
-
-
STOVE replied to the thread So what did you do today?.Cut a bed load off the pile, took it home and split all the maple. Not sure why I brought home the gum. I’ve split several face cords of...
-
-
STOVE replied to the thread First time modifying a cylinder.There is a pronounced lip on the bottom portion of the intake, would you take it out?
-
STOVE replied to the thread Small saw timing advance.It’s been muff modded, and limiters removed. Dropped the bar to 16 and using the Dukes full chisel. It’s an awesome setup as is. From...
-
STOVE replied to the thread First time modifying a cylinder.Continuing my prep for this conversion. I put a piece of cardstock in the jug and traced the existing ports for size and shape. Exhaust...
-
