STOVE's latest activity
-
STOVE replied to the thread Favorite semi skip chain.I use his chain exclusively as is, I just wasn’t sure I wanted 3 chains for a 28” -
Thinking about grabbing a 28” bar for my ms390, it’s got all the mods and some port work. It’s for no real reason outside of not...
-
STOVE replied to the thread STIHL The Official Stihl Chainsaws Thread.I have almost a full tank through my ms390 conversion. I used the Dukes nikasil jug and pop up piston. What type of compression number...
-
STOVE replied to the thread So does anyone fish or just nah???.One of the best ever. I always loved a black gold bead, white as shown, and olive with black hackle
-
- rollomatic 20” with full chisel stihl chain Sprocket pulled from ms290 Looking for $50 split the ride
-
-
STOVE replied to the thread My 290-390 conversion thread.This is the Initial run, idle was running wild and both screws around 2 out Here is the tune as of this evening. What sounds should I...
-
STOVE replied to the thread My 290-390 conversion thread.Finally getting the idle and low jet dialed in. Carb tuning is not my strong suit. Need to find some decent wood to get it in for a high...
-
-
STOVE replied to the thread My 290-390 conversion thread.The contact spring was bent, had a big bow in it that was allowing the end to dip lower than it should. Got the saw cranked. Will do...
-
STOVE replied to the thread My 290-390 conversion thread.Cannot for the life of me figure out the contact spring. If I pull the trigger and push the lever to the full choke position it slips...
-
-
STOVE replied to the thread My 290-390 conversion thread.We have a chainsaw. A few things that were boogerbears in the assembly. The ring compresssor tool works well. The AV rubber grommet...
-
-
STOVE replied to the thread Recent Wood Score Post your Pics Thread.Brought home some old dried out poplar, and some stinky spalted maple. One tiny little row of red oak under the poplar
-
-
STOVE replied to the thread My 290-390 conversion thread.I used the Herman layout for the holes in the face. I also have the stock deflector with th port opened slightly. Can try both. I’m sure...
-
STOVE replied to the thread My 290-390 conversion thread.Stihl waiting on my 1127 ring compressor tool, however a coworker gave welding on the deflector a go. Looks like it will let some air out
-
-
STOVE replied to the thread My 290-390 conversion thread.1127-893-2602 Mine is still in the mail somewhere
-
