srcarr52's latest activity
-
srcarr52 reacted to Duane(Pa)'s post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with
Like.
The stone arbor holds the stone to the motor shaft. It can be moved up and down vertically after loosening a set screw. I’m not sure... -
srcarr52 replied to the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets.You might just need to move the stone arbor on the motor shaft. The 450 lacks a vertical adjustment in the arm you so have to move the...
-
srcarr52 replied to the thread HELP! 500i damaged case.Some of both, the longer spikes create more moment arm on the mounts so I wouldn't jam them into hardwood like you would something with...
-
srcarr52 replied to the thread HELP! 500i damaged case.You can also use some bloc-it heat paste but the damage is far enough away from anything else that I wouldn't bother. I probably weld...
-
srcarr52 replied to the thread Stihl 261c blowing out spark plugs.Try an insert first, when that fails I can weld it.
-
srcarr52 replied to the thread HELP! 500i damaged case.I've welded many like this with only removing the chain brake parts that can be melted and the muffler for access. Everything else is...
-
@srcarr52
-
Yep, Shaun Carr is the guy you want to reach out to...
-
Mr. Carr is who I was thinking of, he does fine work!
-
srcarr52 replied to the thread Husqvarna 562 MK2 beginner porting.Probably because the MK2 lacks the crank stuffers so the crankcase compression isn't as strong as the MK1. They still don't like more...
-
srcarr52 replied to the thread Flap Wheels for Mower Blade Sharpening.40g 4-1/2 Walter zirconia flap wheel on a corded angle grinder... I got better things to do than waste time sharpening lawn blades.
-
srcarr52 replied to the thread Husqvarna 562 MK2 beginner porting.You don't want to read the chamfer on the port opening numbers, you want when the port roof will open. Some people use a really thin...
-
I’ve been following along. Shaun and I talk quite a bit about them
-
More pics Have the latches imaginered so might get them done tomorrow if the steering ram doesn’t get done Final trims for looks and...
-
srcarr52 replied to the thread SELLING 1128 crank shaft & a few cylinders.Is that an 046 D chamber with the spark plug insert?