Squareground3691's latest activity
-
Squareground3691 replied to the thread The Metalworking Thread.Yes , the collets will work for all ur diameter applications, -
@Squareground3691 and @Wilhelm, thanks so much for the help! I was leaning towards an ER32 holder and collet set, and it sounds like...
-
Squareground3691 reacted to Rallyeguy's post in the thread MCCULLOCH The official McCulloch thread with
Like.
I make some that flex and protect but don't break. https://www.oldsawshop.com/McCulloch-10-series-chip-guard-p546356278 -
Squareground3691 replied to the thread The Metalworking Thread.Also use ER 16 , for small diameter applications a lot ,
-
-
Get different size & length collet holders! Not sure about Your machines, but we use ER32/70 for 50+% of our tooling, but there is...
-
Squareground3691 replied to the thread The Metalworking Thread.
-
-
Yes, Weldon is a good option. I forgot about those. At work we utilize collet vs. Weldon at a 100:1 ratio, as such it slipped my mind...
-
Squareground3691 reacted to Only the Tony's post in the thread Random pics (that you took) thread... with Like.
Yep....
-
Squareground3691 reacted to Wolverine's post in the thread Firewood thread!!! Let's see what you got!!!! with Like.
I'm just over 20 for myself and have over 6 for my aging parents. Dad is 80 so I pretty much do most of the labor except for stacking.
-
Welcome back! I've been away myself for a few years. Like you, I had some health issues. The fact that you're running saw and cleaning...
-
It’s been a while since I’ve been on the forum. I retired I 2020 and sat on my butt for too long so about 3 years ago I got on a fitness...
-
Right, well I can see by comparing the deflector on mine with the one you have there that Joe must-have opened up the hole a bit and...
-
Squareground3691 reacted to J.Noss's post in the thread Firewood thread!!! Let's see what you got!!!! with Like.
Well last I checked I've stacked about 25 for myself and am working on 9-10 or so for my step-dad's outdoor boiler, we each burn about...
-
Squareground3691 replied to the thread The Metalworking Thread.I use a combination of ER and Solid holders, the Solid holders are best for rigidity machining,
-
Squareground3691 replied to the thread Show off your muffler mods.The 550 are very restricted and need a large factory opened up and or extra port put in , as I did mine without a screen, I don’t run...
-
