Squareground3691's latest activity
-
Welcome back! I've been away myself for a few years. Like you, I had some health issues. The fact that you're running saw and cleaning... -
It’s been a while since I’ve been on the forum. I retired I 2020 and sat on my butt for too long so about 3 years ago I got on a fitness...
-
Right, well I can see by comparing the deflector on mine with the one you have there that Joe must-have opened up the hole a bit and...
-
Squareground3691 reacted to J.Noss's post in the thread Firewood thread!!! Let's see what you got!!!! with
Like.
Well last I checked I've stacked about 25 for myself and am working on 9-10 or so for my step-dad's outdoor boiler, we each burn about... -
Squareground3691 replied to the thread The Metalworking Thread.I use a combination of ER and Solid holders, the Solid holders are best for rigidity machining,
-
Squareground3691 replied to the thread Show off your muffler mods.The 550 are very restricted and need a large factory opened up and or extra port put in , as I did mine without a screen, I don’t run...
-
-
if you get the bigger mesh screen it will be like having them out and still have the fire protection they provide
-
Thanks! Thanks! Do you think that it would be helpful to get a limited range of Weldon holders as well, or just add them along the way...
-
My vote goes to ER collet holders! Will give You a wide range of cylindrical shaft tool clamping compatibility and You don't need to...
-
Squareground3691 replied to the thread The Metalworking Thread.https://www.mscdirect.com/ , will have a large selection of what you might need, and Kurt vises are the standard for machining , unless...
-
All together again. I did give it a prime and it fired right up, but with the condition of the fuel tank I don't think I will bother...
-
Squareground3691 reacted to John Wargo's post in the thread Random pics (that you took) thread... with Like.
A little shaft liner action from work yesterday. These 12' panels are getting heavier or I'm getting older.
-
Squareground3691 reacted to les-or-more's post in the thread Random pics (that you took) thread... with Like.
-
Squareground3691 reacted to John Wargo's post in the thread Random pics (that you took) thread... with Like.
Made good progress in the garage today. First coat of oil is on. Another coat and then wax tomorrow.
-
Squareground3691 reacted to les-or-more's post in the thread Random pics (that you took) thread... with Like.
I made him these racks to store his rough cut.
