Sloughfoot's latest activity
-
Feels stronger than a stock one for sure. And im sure there is more left on the table to gain also. Once the many brilliant chainsaw... -
Adjusted the squish a little👍
-
I think he means when modifying the ports.
-
Removed base gasket. And opened up the original outlet in the muffler.
-
Sloughfoot replied to the thread Husqvarna 564xp porting.~
-
An internal leaking gasket will do such a thing, basically it's a short circuit of sorts.
-
Sloughfoot replied to the thread Husqvarna 564xp porting.Some cylinders will flake no matter how careful you are and some you couldn't get to flake if you tried. Later model Huskies are...
-
This is more of a general question for everyone, but shouldn't it be an issue for fuel to be coming out of the impulse hole - shouldn't...
-
28 Dec 2005 for me, my older brother Ray (RIP) introduced me. I still spend time there almost daily, but many of the threads run off...
-
Sloughfoot replied to the thread Husqvarna 564xp porting.Did you do do anything to it other than porting the cylinder?
-
It is absolutely necessary for that to be present and functional for the saw to idle correctly
-
Yep, that’s the check valve
-
Sloughfoot replied to the thread Carburetor talk - fuel puddling.On the carb I'm having issue with, there was a round piece of thin transparent film floating around on that side.
-
Sloughfoot replied to the thread Carburetor talk - fuel puddling.Got a carb now that's doing everything right but putting fuel in the venturi. Thinking it may have a clogged nozzle.
-
Sloughfoot replied to the thread Carburetor talk - fuel puddling.I've never replaced a nozzle. Just punch the old one out and tap a new one in?
