Sloughfoot's latest activity
-
Sloughfoot reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with
Like.
It’s most definitely from the advanced timing. And I’m not complaining about it either. But without decent compression, you won’t... -
-
Going to be a heated handle dolmar 7900 with a solo stroker crank. Putting it together with a 6400 cylinder for now before I wreck a...
-
Sloughfoot replied to the thread Preparing to port first saw - which one, and what method?.Will the case loading up cause kickback, or make it feel like it's kicking back?
-
Anything bigger than a Harley V-Twin is just silly.
-
Sloughfoot reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with Like.
I've just avoided Stihls in general coz I heard they were so heavy...
-
Sloughfoot reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
I just ran the saw today for another tank. Dropped two 25”+ standing dead pines and blocked them and limbed them. The saw started to...
-
Something different today.
-
-
P52. This one should make a good vintage runner. I am guessing the open port in the cylinder pic below is what people call the "Boost"...
-
Sloughfoot replied to the thread Not so pros 4 new and without politics or drama.Any of your handguns have a light pull weight trigger?
-
I have a ported Echo 590 with a 24" on it that pulls pretty good I just might end up going back with a 20" on that one since it's not...
-
Sloughfoot replied to the thread treemonkey stuff.My reward for spending countless $$$ and countless time building mine was making 5 whole cuts before a patched air leak reopened. 😥
-
Sloughfoot replied to the thread STIHL The Official Stihl Chainsaws Thread.If it's a WT it should be below the body, even with the top of the depression it sits in.
-
Sloughfoot replied to the thread Question on using a 20" bar.It's unfortunate that 2 40cc saws doesn't equal 80cc.
