Sloughfoot's latest activity
-
No idea but I hope muffler mods with side outlets will gain as much or close because I personally despise any wide open front muffler... -
-
Sloughfoot replied to the thread Husqvarna 2100 thread.Maybe figure it out with brazing rod then match it up. That stuff bends, unbends, and bends again pretty well, but holds a bend too...
-
Ok, so I tried to heat up and bend the 2100 throttle rod today to make it work with the 394xp carb. It never fit great and when I...
-
Sloughfoot replied to the thread MCCULLOCH The official McCulloch thread.I got a can of black rattle can off the shelf at HD years ago that put down a nice spatter finish. Namebrand they called hammer...
-
Sloughfoot replied to the thread $200 logger boot shootout.That boot looks to have a fair amount of life left.
-
Zero response from georgia boots.
-
Sloughfoot reacted to redneckhillbilly's post in the thread WANTED 026 Crank case/carcass with
Like.
heres a few pics, message me if you wanna talk turkey. -
Sloughfoot reacted to redneckhillbilly's post in the thread WANTED 026 Crank case/carcass with Like.
Ive got an 026 thats missing the air filter cover but otherwise complete, it runs, but has at least what I feel is pretty low...
-
The piston, ring and jug all came in the same meteor kit so you would hope the ring would be ok. I'll check the bot clamp again when I...
-
Yes I first chased several air leaks then found the new ring somehow ended up being pretty high gap even though I feel like I checked it...
-
@Shane¹ just recently went through some issues with a 350 that I had ported a cylinder for. Sounds like some of the things you found...
-
Yeah its very similar to how this is behaving, will run and cut great for one cut or so then start dieing. If I idle for about 15...
-
OEM parts? Yes except the riser Did you square off the riser? No I had no means to do this, gave it a basic measure with calipers and...
-
Here's a 346xp hybrid I did that had the impulse blocked, easy fix but a PIA.