Sloughfoot's latest activity
-
TS350 Super. I acquired this probably 12-13 years ago, I forget how. Ended up selling it to my dad who barely or never used it... -
Very pretty saw. I built two saws from completely new parts. One was a 346NE and the other was a 372. Total receipts on the 346 was...
-
Sloughfoot reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with
Like.
Looking good. I don't use a single or double cut burr to tidy up the corners of the upper transfer ports. I use a 180 grit diamond burr... -
Trace the exhaust port opening onto the piston skirt with a pencil so you can see the shape better.
-
Sloughfoot reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
I absolutely love seeing guys get into this stuff. Anytime you need advice on anything....don't hesitate to reach out.
-
Thanks for all the advice. I'll do a little trimming on those corners and run it a little to see how it feels. I've read through a...
-
Sloughfoot reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
A few tips....if you don't mind. Look at the top of the intake port in relation to the piston skirt and ring. Most likely you can...
-
I'm a rookie but kind of addicted to chainsaws. This isn't exactly artwork but here it is. It's an acquaintance's 660 clone that he...
-
Sloughfoot reacted to David Young's post in the thread Post up your ported cylinder Artwork with Like.
yoos guys are advanced I was just gonna say he's old. Does the desktop control vary from just creeping to WTFO, you set in one spot and...
-
It’s unfortunate that Stihl took a step backwards with the 54mm “upgrade” from the 52mm 064 cylinder. I still don’t understand why...
-
I got some time this evening to rework the ports. Still not real artwork, but tried to follow the advice given. Ended up 98 / 118 / 81...
-
Sloughfoot reacted to FederalQ's post in the thread Random pics (that you took) thread... with Like.
Die Frauen making cookies with 661’s. Milwaukee, WI
-
Sloughfoot reacted to NZsaws's post in the thread MCCULLOCH The official McCulloch thread with Like.
Did McCulloch intentionally make a really short chain adjuster on the 10 series just to piss everyone off? Added 1/4" with mig welder...
-
Did a 250 mile cannonball run in the $550 Element for civic parts. Bad traffic, storms, shot wiper linkage, junk motor mounts, two year...
-
Sloughfoot replied to the thread Random pics (that you took) thread....Yeh, that saw may never smell right again.