Sloughfoot's latest activity
-
Sloughfoot reacted to bryanr2's post in the thread In the market for a bike handle trimmer with
Like.
Went to get the 251 today. Price was $679 as opposed to 749 for the smaller fs240. They had 7 240s and this 1 251. I bought a brush... -
Seems like the viscosity would be too low for bar oil, but I bet it smells good!
-
Sloughfoot reacted to heimannm's post in the thread Great Moments in Chainsaw Serendipity with Like.
1" pipe plugs if I remember correctly. Mark
-
Sloughfoot reacted to Philbert's post in the thread Great Moments in Chainsaw Serendipity with Like.
I have a few of the Remington electric chainsaw / pole saw things. One, I bought on purpose. A few others were just very cheap at garage...
-
Sloughfoot reacted to PA Dan's post in the thread SELLING Husqvarna 261/262xp Rattler ported. with Like.
Up for sale is a very clean 261/262xp with a Rattler ported cylinder. I converted this with the ported cylinder and a new Meteor...
-
Sloughfoot reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
$225 less 1/3 (eBay and PayPal fees) = $150 face to face. Mark
-
Sloughfoot reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Ernie - check the compression. I'd say $150 for 150 PSI is good. Below 120 PSI think hard, it may just need rings, it may need a...
-
Sloughfoot reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
I have the 12-25 all cleaned up now, tomorrow I will begin putting the puzzle back together. The saw came with an extra starter so I...
-
Sloughfoot reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
The serial numbers are only helpful, not definitive. You need to find an IPL with the prefix listed (10-, 11-, 12-, etc.) and from the...
-
Sloughfoot replied to the thread MCCULLOCH The official McCulloch thread.There's a runner on Ebay that doesn't look as nice as this one. They're asking $225 + $48 shipping. Don't know how long it's been...
-
Sloughfoot reacted to ErnieG's post in the thread MCCULLOCH The official McCulloch thread with Like.
What's the going price for a 555 ? This one is for sale near me and looks in good shape .I'm not really up on the McCulloch market ...
-
Sloughfoot replied to the thread MCCULLOCH The official McCulloch thread.Sweet! I'm gonna hold onto that if you don't mind.
-
Sloughfoot reacted to hacskaroly's post in the thread MCCULLOCH The official McCulloch thread with Like.
Looking at the IPL manual range for the model 6000s there are 8 IPL iterations for the 14 series, 600014A, B, C, E, F, G K and U. Since...
-
Sloughfoot reacted to hacskaroly's post in the thread MCCULLOCH The official McCulloch thread with Like.
Homelites are the same way, the only real help in figuring out approximately what date those saws are come from a ledger kept by a shop...
-
Great post, I use similar stuff from Napa. I have used that stuff on mufflers, it will work fine, I have never had an issue. but it...