sixonetonoffun's latest activity
-
sixonetonoffun reacted to hacskaroly's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with
Like.
I put fuel in the saw, pulled 5 times, it burped, dropped the choke and it fired right up. I needed to do a slight adjustment on the low... -
Thoughts on an eight tooth sprocket and 16 inch bar on a 520 SP. Was reading that is the way they came in 1983 in Sweden?
-
Since the hand guards for the 70's vintage saws are hard to come by, I took the parts from a 621 that I have in the shop and put them on...
-
Cleaning continued today. My son took over this afternoon while I spent some time taking care of my lawn. 5+ inches of rain this week...
-
sixonetonoffun reacted to Bill G's post in the thread HELP! How do I research a vehicle history.... VIN lookup sites? with Like.
I phoned a dealer a bit ago and spoke with a nice young lady. She ran the VIN and said it showed 8 owners but owners 1 through 6 might...
-
sixonetonoffun reacted to Bill G's post in the thread HELP! How do I research a vehicle history.... VIN lookup sites? with Like.
That is definitely an option but since it is 26 years old I doubt it has been to the dealer much after the warranty ran out. The guy...
-
sixonetonoffun reacted to Mendocino Redwoods's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
That’s good to know, what AM p/c did you use? I haven’t even had a chance to look at these ones, I have a couple other projects I’ve...
-
sixonetonoffun reacted to Mendocino Redwoods's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
-
sixonetonoffun reacted to FernGreen's post in the thread Best and Worst years of the 372 x-torq (aka what design changes) with Like.
Alright so here's what I found for design changes according to the factory service bulletins. Looks like most of them were implemented...
-
sixonetonoffun reacted to Stump Shot's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
For the enquiry minds... The timing of the two seem to be very close to the same for now, I will get back with more details later. The...
-
sixonetonoffun reacted to Stump Shot's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
Well, I use it to scrape gaskets off on saws, some get ported, so, maybe? The Husqvarna 576XP specifications are as follows: Engine...
-
sixonetonoffun reacted to Stump Shot's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
There you have it folks, all ready to accept the "updated" 576xp top end. I think now you can see why it's not just a plug and play...
-
sixonetonoffun reacted to Stump Shot's post in the thread Relevancy of Husqvarna 570 and 575xp loggers junk saws with Like.
Here's a visual of both top ends with the gaskets to a fro for comparison.
-
Since I already ordered the LRB piston for the 451E I got started on getting this 451EV cleaned so I can prepare it for the display as...
-
While rummaging around in my garage today I was reminded of another small Jonsereds up on the shelves, turned out to be another 451. An...