singinwoodwackr's latest activity
-
Ssinginwoodwackr reacted to srcarr52's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with
Like.
I modify the original arm and then make a few components for it all to work. Probably around $250 with return shipping. -
Ssinginwoodwackr reacted to srcarr52's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
Yup, I can modify those old Simington 450's so they have a vertical and horizontal adjustment.
-
SI probably have everything you need. Depending how nice you want? Send me a private message.
-
SYears ago (mid 1990's) I had an 026 that was having issues at idle - a local long-time small engine tech told me to notch the throttle...
-
Ssinginwoodwackr replied to the thread What's on your bench?.No, that one should get rebuilt as well but it still runs fine.
-
Ssinginwoodwackr replied to the thread What's on your bench?.One was just fine, the other got replaced with another used one. Both got sonic tanked in Berryman’s and checked for smoothness...
-
SStuck inside due to weather and waiting on parts for the 056. Decided to check out the top end on the old 066, which looks pretty good...
-
Ssinginwoodwackr replied to the thread Husqvarna 350 build thread.Most of the time…
-
Ssinginwoodwackr reacted to Wolverine's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
OE 450 just has 2 holes to thread that chain holder knob into, as far as I know. You can’t raise or lower the holder. The eccentric...
-
SI have tried it and there are small gains, but not worth it in my opinion. It is hard to raise the transfers enough and still aim them...
-
SOne of my favorite 350 mods using a part that I stole from a 353 and mounted on a 350 with muff mounts that kept loosening up. I cut off...
-
Ssinginwoodwackr replied to the thread WANTED Shindaiwa 757 complete air filter kit assembly.Just order everything shown except the carb and choke lever
-
SThis is what it looks like when the vent is missing. This is on a saw with a primer (I can’t remember if all the 350’s have primers)...
-
Ssinginwoodwackr replied to the thread Carburetor talk - fuel puddling.I’d move..
