SimonHS's latest activity
-
-
For sale is a 2021 stock 572xp, has had a new shortblock and new piston replaced a few months back. Piston was replaced due to light...
-
I finished putting the Orline powered generator back together. Mark
-
Echo 7310 came in with low compression. It still ran fine but it didn’t idle well after getting warm. Both piston ring locator pins had...
-
After enough fighting with non locking flex head ratchets getting stuck on rusty hardware I did a ratchet binge. Got the last one today...
-
Based on the Orline/O&R/Ohlsson & Rice engines, drill and generator. Drill came from Bob Anderson and generator from Steve Corrio...
-
Bought cheap impact socket sets for my work truck 14 piece 1/2" set for 20.00 off the amazon 48 piece 38" set from aliexpress 23.00 shipped
-
SimonHS reacted to davidwyby's post in the thread Recent Wood Score Post your Pics Thread with
Like.
Around 20,000 -
Cleaned up the new addition. Had the parts to throw some west coast trim on it. Still waiting on a carb kit.
-
I've had a ton of 5 series saws, right back to the beginning running the 576. Very few problems with them, outside of what you'd have...
-
The stock roller bearings are damn tough. They rarely go bad. If the plastic cage is intact and everything turns they can be cleaned in...
-
Fixed.
-
MS200t. I made a temporary rod by cutting and bending a piece utility flag wire.
-
More pics
-
I did my 1st piston swap today. I did it on a Husqvarna 261with a 262xp meteor piston/caber ring. Modded the oem muffler after soaking...
