SimonHS's latest activity
-
The missing link for this guy showed up a few days ago and I got tired of kicking a box full of parts so I slapped it together last... -
I believe for the more casual(firewood type) user that should be a fairly reasonable expectation. While it remains in the minority of...
-
I decided to check where this engine from the brush cutter was leaking, the sealing compound had leaked on the crankcase 🤷♂️
-
What he said.
-
The 550 are very restricted and need a large factory opened up and or extra port put in , as I did mine without a screen, I don’t run...
-
Here is one of my most used saws. A crew saw my main saw. This is one that is a daily runner in the most demanding weather, wood and...
-
What a smelly saw. The start/stop lever is the wrong color and your fins are on sideways. You must be on the weak crank. At least...
-
So the 359 after looking at it is a low time saw. It still had about 75% of the upc tag on the bottom of the tank. Anyway it had a 20”...
-
All together again. I did give it a prime and it fired right up, but with the condition of the fuel tank I don't think I will bother...
-
Good day farmchuck, Lotta busy, odd job stuff. Finished milling some spruce for a 10x20 cabin tent deck. Drove 8 hrs south, did a giant...
-
A small collection that I'm going to go over, inspect, clean, shine up, then we'll see if any remain or if they get dumped on the...
-
SimonHS replied to the thread So what did you buy today.I've been wanting a small power hacksaw for a while. This vintage unit popped up locally and I went to get it today. Paid £26 / $35...
-
-
After sawing yesterday, I noticed that the AV system felt strange. It was loose in one direction. I then noticed that this white part...
-
All cleaned up and going back together...we had to make a couple of gaskets for the pieces that connect the engine to the shaft housing...
-
Needs a good cleaning and inspection. We will have to make a few gaskets on the way back together since some were torn during...
