SimonHS's latest activity
-
Bought a junked out filthily T540xp of eBay for $71.00 shipped It was said to have low compression, and the break handle is snapped... -
1972 AMC Javelin. Roached but very solid. Plan to build it to race in the 24 Hours of LeMons...
-
I tested the metal burner - it works 👍🤠
-
Didn't take a before pic. Surprisingly the transfer was not horrible. It was very light, not super thick or really bonded if that makes...
-
A few things for $20👍🤠 Caliber 6mm/0.24"
-
Got me a big ol’ socket today.
-
Hit up the harbor freight after work. The van and truck have their own dedicated tool boxes. Needed a compact tool set for the trunk of...
-
The equipment is from 1994 and the service sticker is 3 years later. I just added grease 🤠👍 The saw blade is 6" with a small handle. I...
-
A few things for $20 🤠👍 Pipe clamp without a pipe 😉
-
I only added grease to the bearing behind the rotor and the rest is ok 👍🤠 All that's left is the name and a bit of orange paint 😉 Poles...
-
SimonHS reacted to sixonetonoffun's post in the thread 050 chain on .058 bar ah ha moment with
Like.
.050 chain on .058 bar When I bought my non EPA 2065 it had a 20" bar n chain on and came with a 28" Oregon Power Match Plus bar and... -
Working on a buddies ms310. Scored bad. Complete tear down. Oh I love working on Stihls🤣 I have a deep resect for guys that are hard...
-
Today I went crazy 😉 $50 🤠👍 The Fein drill is about 60 years old and the Ideal is a metal engraving device. Two Ersa and Stannol...
-
She was dirty!!
-
Got the 064 all stripped down and mostly cleaned up, had a little damage to the front part of the case, not leaking though, it has been...
