Shane¹'s latest activity
-
SYea, im not impressed with the new stihls, especially the 462 and 500. The cases are so thin that they bust out easily
-
SHe probably just got done with 35 562’s though, so🤷🏽♂️😂
-
STrue. I do not have FB I use my wifes for marketplace
-
SActually, its been the hundred thousand 572's that have lost crank bearings that haunt me the most 🤣🤣😂
-
SIve discovered that rev limited saws are the most prone to cracking the cases, no matter what size, model or brand. This is most often...
-
SIn this particular case I’m not sure, but it’s very common for the crankweights on the lobes to not be lined up perfectly. If you look...
-
SShane¹ replied to the thread HELP! 500i UPDATE !.I straightened a 7900 one after pressing in a new bearing and then welded the pin as well. Actually done it 3 times now none have...
-
-
SShane¹ replied to the thread HELP! 500i UPDATE !.Link is not working
-
STwo V blocks and a dial indicator will show you the truth. I had to check a solo 681 crank after I welded the pin.
-
SSea backs and sill plates on.
-
SLooks good Ed!
-
SClutch side bearing grenaded.
-
SCrank bent. Don’t use it. It takes very little to irk one, less than you’d think. If you somehow get it to go in, it’ll really grenade...
-
SBackstory to this saw? Get a pic of the other side of the lobes.
-
SPut together cases today and it would not spin freely. Tapped on both clutch side and FW side with center punch and hammer to center and...
