Shane¹'s latest activity
-
SShane¹ reacted to oddsaws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
You da man @FATBOY2017 thank you -
SShane¹ reacted to oddsaws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Getting closer to finishing my first Dolmar build, a 114. Shout out to @Shane¹ who has been most helpful getting me through this project 👍
-
SShane¹ reacted to oddsaws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Looking for the repair manual for Dolmar 114 if anyone out there has it…
-
SShane¹ replied to the thread What's on your bench?.Got the 350 cylinder porting finished and cylinder bolted down today. Got to do the timing advance, muffler mod and see if it will run
-
-
SNiece's RAV4 is pushing 300k Lost most power and a severe misfire for some reason Couldn't imagine why Neither she or her husband had...
-
SSmear some sealant on the threads and it’ll be good to go. Every time I grind one of those I have to find the first bolt.
-
SGood Morning, Last year I found a thread that had step by step instructions with pictures for the 350 to 346xp. I've recently tried...
-
SThis one? And another good one. @farminkarman not meaning to hijack your thread, buddy. This is just a subject dear to my heart.
-
SThank you!
-
SShane¹ replied to the thread Post up your ported cylinder Artwork.Did a little transfer grinding maybe too much hopefully I can jb weld the one cap bolt in? If not it'll get a 346 cylinder of some...
-
-
Soriginally came to me locked up, found flywheel sheared due to backed out coil screw. replaced coil and flywheel. now can't pull to...
-
SHave you rotated the crankshaft to different positions (TDC, BDC...etc) and reinstalled the plug and see if it rotates at all, or does...
-
Sseems to be at tdc .even installed shorter plug to make sure wasn't hitting. just had a thought , scary but could the hard stop have egg...
-
SJust so I understand, it pulls hard at TDC with the plug out? Have you sprayed some WD-40 or put any 2-stroke oil in the cylinder to...
-
Swhen the flywheel sheered, could it by chance have damaged any of the starter pawls or is the recoil possibly binding up?
