Shane¹'s latest activity
-
Sseems to be at tdc .even installed shorter plug to make sure wasn't hitting. just had a thought , scary but could the hard stop have egg...
-
SJust so I understand, it pulls hard at TDC with the plug out? Have you sprayed some WD-40 or put any 2-stroke oil in the cylinder to...
-
Swhen the flywheel sheered, could it by chance have damaged any of the starter pawls or is the recoil possibly binding up?
-
Spulling fine and dandy with plug removed . not rubing recoil and pawls are good, thinking now rod related to hard stop, was hoping to...
-
SI’ve never seen a forged rod bend. I have seen Stihl’s stamped rods bend and cause strange cranking issues. You’re sure nothing is...
-
SIt is definitely helpful, I have learned lots here from both my questions and other people's questions too!
-
Syes, oem parts, bore scope didn't see anything and doesn't bind without plug installed. probably tear down after hitting the lake today...
-
SShane¹ replied to the thread br-350 hard to pull rope.How did you get the flywheel off? Maybe if you taped the crank it needs to be recentered?
-
SI haven’t done a 350 jug, but it looks extremely similar to 359. I hate the sharp edges at the bottom of the lowers. I smooth those top...
-
SShane¹ reacted to lehman live edge slab's post in the thread Post up your ported cylinder Artwork with
Like.
While not a pro porter and still just messing some with it the lowers look way to restrictive and I personally would cut them out to... -
SShane¹ replied to the thread Post up your ported cylinder Artwork.Started porting husky 350 cylinder. What would you guys suggest doing on the lowers? Open them up a bit or leave them tight?
-
-
SWhat brand/model chainsaw is this? Edit: Never mind, I just saw on your other thread that it is a Lombard.
-
SShane¹ reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Thanks Ray - the Clymer manual shows the governed carburetor and @EFSM pointed out in another thread that some had that limiter rather...
-
SShane¹ replied to the thread SELLING Pioneer p40, pioneer farmsaw parts saws lot.@jacktheripper
