Shane¹'s latest activity
-
SShane¹ replied to the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421.There is a good taper on the flywheel side I am sure it will slide together fine and you won't even need a new seal
-
SShane¹ replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I had a ps510 or 460 do this needed a coil
-
SShane¹ reacted to ErnieG's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Yes starts one pull ... Ernie -
SShane¹ reacted to ErnieG's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I thought a fuel delivery issue also but it's a new line and filter ...I'm fairly certain the line the same I.D as the original but I'll...
-
SShane¹ replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Does it restart after shutting off?
-
SShane¹ reacted to ErnieG's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Thank you very much for the information! For the heck of it I tried to run it WOT with the choke on and it ran without cutting out like...
-
SShane¹ replied to the thread WANTED Husqvarna 2100 air filter cover.After further inspection I may have the correct handle but need to know what the hardware and springs look like now. If anyone could at...
-
SShane¹ reacted to FergusonTO35's post in the thread HELP! Help with first time porting Echo 800P with Like.
Welcome, friend. You may want to reach out to Kris at S&S Worksaws, he is a member here. Kris did a woods port and increased compression...
-
SShane¹ reacted to dthieme's post in the thread HELP! Help with first time porting Echo 800P with Like.
Hello everyone, new member here. I haven’t yet read through the forum, but judging by the many pages of info, looks like there’s a lot...
-
SShane¹ reacted to dthieme's post in the thread HELP! Help with first time porting Echo 800P with Like.
Awesome, thanks for the tip!
-
SShane¹ reacted to FergusonTO35's post in the thread HELP! Help with first time porting Echo 800P with Like.
You got it. Keep us updated on how it turns out. Also, member Mainer_in_AK has a lot of experience with the big Echoes, I don't know if...
-
SShane¹ reacted to Woodpecker's post in the thread HELP! Help with first time porting Echo 800P with Like.
@Stump Shot @Mastermind @huskihl @farminkarman
-
SShane¹ replied to the thread HELP! Help with first time porting Echo 800P.@srcarr52 too
-
SNot sure if this exploded view from the service manual might help any:
-
SShane¹ replied to the thread WANTED Husqvarna 2100 air filter cover.I am not sure if I got the right handle. Would I be able to bug you for a few pictures of where the handle connects to the clutch cover...