SCHallenger's latest activity
-
SSCHallenger reacted to huskihl's post in the thread How many degrees timing advance MS 400? with
Like.
Hurting the power for that size wood, not hurting the saw. I would do what was mentioned before, somewhere between 6 and 8MM of... -
SSCHallenger reacted to huskihl's post in the thread How many degrees timing advance MS 400? with Like.
It’s not an “optimum power” thing. More timing advance typically adds lower rpm power but also holds back some unloaded or less loaded...
-
SSCHallenger reacted to Mastermind's post in the thread How many degrees timing advance MS 400? with Like.
7mm at the outer edge of the flywheel.
-
SSCHallenger reacted to wilfrie's post in the thread How many degrees timing advance MS 400? with Like.
Hello! As a tree climber I do like my Stihl MS 400, but I would like to increase the bottom power (torque) a bit more. I opened already...
-
SSCHallenger reacted to Philbert's post in the thread Reflective / Protective Chainsaw Vest with Like.
Interesting idea in PPE: a Class II vest made out of chaps style protective material. Philbert
-
SPorted 346 and ported 500. The only two saws a guy needs to cut wood 👍
-
SSCHallenger reacted to Woodpecker's post in the thread SELLING Husky 550XP MK2 new in the box with
Haha.
Trust me Tim and Ryan are already so out of the closet!😉 -
SSCHallenger reacted to pbillyi69's post in the thread New chainsaw to replace Stihl 08s (MS362/400/462) with Like.
another thing is the 462 will pull a 28 or 32 inch bar and wont miss a beat
-
SSCHallenger reacted to hacskaroly's post in the thread New chainsaw to replace Stihl 08s (MS362/400/462) with Like.
I have a MS 261c that I really like, 4hp at 13 lbs, however my new favorite when cutting firewood is a Husky 272 (same cc class as the...
-
SJasha was a real one. A great husband, a great dad, and an honest man. Gone too soon. “Good people pass away; the godly often die before...
-
SI've had a Ridgid 10" belt drive for 25 years. I've cut enough with it to need expensive crosscut and ripping blades. I've made 0...
-
SSCHallenger replied to the thread Table saw. 10" vs 12".That about saya it all! I have a PM mod.66 running a 3hp, 240V single phase & a Northfield 20 bandsaw running a 3hp Baldor (US made) via...