SawAddictedFarmer's latest activity
-
SawAddictedFarmer reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics or drama with
Like.
Err, I got 15 working chainsaws. 2 blowers and 2 hedge trimmers (1 long reach) and a strimmer with cowhorns. It’s looking a bit... -
SawAddictedFarmer reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning fellas I cut a few ash logs last year with my chainsaw mill. So I thought I’d put one of them to good use. I’ve sanded...
-
SawAddictedFarmer reacted to Tor R's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning guys
-
Another little batch tool arrived today:
-
SawAddictedFarmer reacted to Chainsaw's post in the thread How Often Do You Adjust Your Carb? with Like.
Thanks for the replies - much appreciated!
-
SawAddictedFarmer reacted to singinwoodwackr's post in the thread So what did you do today? with Like.
Got another member's 350 back together and running. Gonna take a bit to seat the new ring.
-
I put a 2x4 on the bottom of the right side then beat on another 2x4 on the top left. I should have used a gentler method but that rusty...
-
I've seen some angle iron used to span the box and then a handful of bar clamps on the ends of the angle iron, pull a couple of tool...
-
SawAddictedFarmer reacted to FederalQ's post in the thread What oil is best? and what ratio? with Like.
$11.49 per quart, $40.95 per gallon.
-
SawAddictedFarmer reacted to bwalker's post in the thread What oil is best? and what ratio? with Like.
I will give Schaeffer's credit for selling cheap. I'd pass on the boat oil though.
-
SawAddictedFarmer reacted to Woodtroll's post in the thread Not so pros 4 new and without politics or drama with Like.
Ouch! Looks like Mr. Pinion gave up some teeth too.
-
SawAddictedFarmer reacted to Creaky limb tree care's post in the thread Ms362 exhaust leak. with Like.
Just a word of warning, never tighten muffler bolts when the saw is warm. When installing a new gasket or muffler run a few heat cycles...
-
SawAddictedFarmer reacted to singinwoodwackr's post in the thread So what did you buy today with Like.
I’ve probably cut 2000 cord with this thing, lol was my 1-saw plan for years…just swapped bars from 24-42”.
-
Dug this out of the tool dump. Three drawers were in front of another building half buried and this was in the back of a junk truck. It...
-
Fixed my stripped threads with a borrowed Time-Sert kit yesterday. Slicker than greased goose sh1t. Might just buy my own kit one of...