SawAddictedFarmer's latest activity
-
SSawAddictedFarmer reacted to John Wargo's post in the thread Not so pros 4 new and without politics or drama with
Like.
7.3 godzilla gasser -
SSawAddictedFarmer replied to the thread Stihl workshop manuals.Anybody got the current ipl and service manual for a 362 bought new spring of 23? @ray benson sent them but they both are for the old...
-
SSawAddictedFarmer reacted to dieselfitter's post in the thread Gun range 2022,2023,2024,2025,2026 with Like.
I made a swivel base for a friends vise. I used the ball from a scrap heim joint. It turned out nice.
-
SThis thread has touched a lot of nerves. That's not a bad thing. I just want to ask everybody to keep it civil.
-
SSawAddictedFarmer reacted to 59billy's post in the thread Not so pros 4 new and without politics or drama with Like.
As much as I like motorcycles, in my experience, collisions are more fun in a car or truck.
-
S@chipper1 does that so he can take a break sooner 👍👌😂
-
SIt is fun to tinker up something of Your own. And it feels very satisfying when it comes out the way You envisioned it. :)
-
SI believe the math formula for correct number of saws is Rm+ or some such similar which is one more than the present number of saws you...
-
SSame.... absolutely hated mtronic untill i got 2 of them....🤣🤣🤣 now they are the most used saws.... run the 261 until its too small...
-
SAgree….i keep a 20 in my 362 (I rebuilt it don’t have much in it), and it runs fine even full bar buried in hardwood, but ya the 261 and...
-
SSawAddictedFarmer reacted to lehman live edge slab's post in the thread Definitive Dave...Discussion with Like.
I didn’t realize he had been having issues last few years, he’s definitely a great individual and I was glad to meet him at your g2g...
-
SAs for size and type, I tend to run 67-76cc saws with 24” bars and full wraps as a standard for firewood. Most of my firewooding...
-
SDepends on specific target. 50cc for limbing/branch wood bucking & trail maintenance. 60 or 70 for log bucking or noodling. 80 for...
-
SWhy?
-
S036 is the most used. Small stuff a 028S or 026. Bigger wood 038M. Don't cut much huge stuff but have 056M and 066 for that.
