SawAddictedFarmer's latest activity
-
SSawAddictedFarmer replied to the thread Stihl Ms 261C Help! Idles but dies at full throttle..Has it sat more than a week or two? Sounds like you may need a new carb. I have also seen one where the coil failed and it did something...
-
SSawAddictedFarmer reacted to lehman live edge slab's post in the thread Mildly porting a 026 with
Like.
First off don’t do anything to muffler till you make sure the carb is a fully adjustable one. If it doesn’t have a wt-194 with both high... -
SSawAddictedFarmer replied to the thread Mildly porting a 026.It's the fully adjustable wt-194. I and the guy who owns the saw can both tune. So looking at the non pto side you take off the right...
-
SSawAddictedFarmer reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
No. Never reset it unless you change the solenoid.
-
SLet’s be honest it’s ok for what they are but they also have many different lines of tools some are the price of Milwaukee, dewalt...
-
SI know and have worked with contractors and the harbor freight tools are just fine for homeowner but are not on par with Milwaukee or...
-
SSawAddictedFarmer replied to the thread Foam filter? Or leave it with the stock filter? MMWSms462.Well it showed up. Should I reset it before using it?
-
SSawAddictedFarmer replied to the thread Cordless impact.And I totally get that, I by local at small business when I can even if they aren't always the cheapest. But with the exception of a few...
-
SSawAddictedFarmer replied to the thread Cordless impact.Now if I was doing something full time that HF did not make the tool for I would go Milwaukee just to only have one set of batteries.
-
SSawAddictedFarmer replied to the thread Cordless impact.The Hercules are just as good as DeWalt/Milwaukee in my opinion and I've used all 3 a decent amount. BTW I've killed tools from all 3.
-
SSawAddictedFarmer replied to the thread Cordless impact.Harbor Freight has the best deals. If I was starting out again I would get mostly 8ah batteries, we just cut 120ft of 1/2in osb on 1 8ah...
-
SSawAddictedFarmer replied to the thread Cordless impact.We have all Hercules power tools no problems yet and they've been to hell and back. The 1/2in Ultra Torq impact is awesome, with heavy...
-
SSawAddictedFarmer replied to the thread Starter reluctant to engage flywheel on Honda GXV630 engine.Any chance you can replace just the gear with a OEM part?
-
SSawAddictedFarmer replied to the thread Mildly porting a 026.So back to the saw. For a timing advance how much do you take off the side of the key and which side? Muffler mod, can I just cut the...
-
SSawAddictedFarmer replied to the thread Mildly porting a 026.As soon as I get this round of stuff finished we have to get our case 1070 in the shop and split it... Hopefully we don't have to tear...