Ronaldo's latest activity
-
I have about ten saws including the 500i. 90% of the time I pick up the 572. Something about it just feels good. -
-
Ronaldo replied to the thread 020t just WILL NOT oil!.Take the bar & chain off then start the saw and see if it is pumping oil out of the case. If it is you know it’s a problem from there...
-
When it needs it yes but not just the fun of playing with thee L/H screws. As above when the saw is running nicely why play with it.
-
More pine. Getting too hot out for all the splitting. A little more than a face cord in this load.
-
It depends on what level of performance you expect from a saw. Temperature, humidity, and barometric pressure differences, as well as...
-
Ronaldo reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
The olden days when they had round curves instead of boxy corners. 🥰 -
Ronaldo reacted to mbret2004's post in the thread HELP! Stihl MS 260 Pro oiling problems, burning up bar and chains with Like.
Exactly! That bar plate can get dented, warped, damaged by a loose chain. Once damaged it won't secure your oil line flush to the saw...
-
I had many people coming up to me at work wanting to buy a new chainsaw bar because of the bluing streak along the rails being told they...
-
Looking forward to see what the builders can get out of one. I’ll have to buy a spare carbed 261 before they go kaput.
-
That sounds like a great dealer and someone worth supporting.
-
-
Don't worry, about 10 years after Stihl stops producing them, @Bill G will still have several NIB 261s (probably mTronic and carb...
-
Figured I’d make a thread of my own instead of hogging up the Husqvarna thread. For those new to my endeavor: I recently purchased a...
-
Agreed.... no need or desire for FI in a chainsaw.... M-Tronic is complicated enough as it is.... (coming from 10 yrs of working at...