Rio95's latest activity
-
RYou are a long ways away, but I do have some oiler buttons for the SP105/125 saws. Mark
-
RRio95 replied to the thread MCCULLOCH The official McCulloch thread.I've got the old SP 105 running now. Thanks to everyone's help, we got good spark, then I had to replace the clutch side crank seal and...
-
-
RI fixed it. Congrats on getting everything squared away. Stuff happens! I was working on a new (new to us) antenna we received from an...
-
RRio95 replied to the thread MCCULLOCH The official McCulloch thread.Thanks everyone for the tips - we've got spark!!! 😁 Everything checked out well with 0.20 gap on the points, set the air gap to the...
-
RThe points should be set at 18 thou . On a points type ignition the trouble will be on the low voltage side,the points and condensor .If...
-
RWhat are you setting your points gap to? Are you testing to see if the points are opening and closing with a meter, have had worn lobs...
-
RThe secondary should be around 9K ohms, make sure your meter is on the correct range when testing. Mark
-
RRio95 replied to the thread MCCULLOCH The official McCulloch thread.Thanks, yes, surprised that it didn't get more bids, but lucky me, I guess. I have tried 3 different spark plugs, 2 brand new, with no...
-
RThat is awesome to get that saw for $50!! Yes it is dirty, but should look good after a good cleaning! You probably already did this...
-
RRio95 replied to the thread MCCULLOCH The official McCulloch thread.I finally managed to get my hands on an big mcculloch as I picked up this SP105 for less than $50 at an auction including the chainsaw...
-
