redneckhillbilly's latest activity
-
redneckhillbilly reacted to Philbert's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
I am not a fan of the CBN wheels. I know that makes me an outlier. I did not like the finish I got with $100 wheels off Amazon. I... -
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.anybody have anything good or negative to say about the $69 cheapo CBN wheels on Amazon?
-
redneckhillbilly reacted to mrxlh's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
CBN wheels will be your friend on clean chains, no dressing, and can be re-coated for about a 1/3 the cost of new wheels.
-
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.I'm content with these chips, .325 husky safety chain on a 550XP in a green doug fir that blew over a few days ago.
-
-
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.ive been cleaning the wheel in between chains, it was just one of those thoughts that roll through your brain as your doing something.
-
redneckhillbilly reacted to Duane(Pa)'s post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
Oil is the enemy. It will clog the abrasive and next thing you have is heat! Heat is what takes the temper out of teeth.
-
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.i took the time yesterday to read this whole thread and soak up all the info I could, I grabbed my most worn chain this morning and gave...
-
redneckhillbilly reacted to Philbert's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
My generic advice to all who are new to grinders: ‘Keep in mind that grinders don’t sharpen the chains: you sharpen the chains. For...
-
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it. I gotta admit this...
-
-
redneckhillbilly replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.30/55/0 Im setting up to grind my 1st chain ever, been a hand filer my whole life, but I have to many saws and too many chains now to...
-
-
redneckhillbilly replied to the thread Stihl MDG Software Updates?.all auto and equipment manufacturers would do the same as deere if they could. BMW wants a subscription for heated seats to work. GM has...
-
I ran .050" chains I got from the US in my used .058" bars without issues. Keep the bar rails dressed/flat and the chain sharp and...
-
Now before I go any further I've stumbled in to this after falling into a YT rabbit hole of what makes footwear brand "A" cost more...
-
So in the last few years I've started a new hobby that I can say saves me money, cobbling. So here is a pair of boots I'm reworking. Now...
-
redneckhillbilly replied to the thread ring & pinion seal replacement crush sleeve question.straight from Alldata. mark everything, remove yoke and seal, install new and tighten it bàck up
-
