Recent content by redlight066

The carb shows in stock and available to ship. I can install the firmware as well. 864-991-1330 Thanks, Rich

Nicest one I've seen in a while. Someone's going to be very happy as the new owner.

New coil is on top. Only visual difference is the small print on the back side of the housing with the proper part number. Side facing forward when you remove the starter housing shows no way to differentiate from the previous version.

I've had multiple coil failures in the last year or so, specifically the V3 module. That being said, 95% of my customers are tree services, so I work on a lot of 201's. There's a "new and improved" V3 module. PN 1145-400-4713. Maybe it will last. Time will tell.

Randy, this is a great idea. If I find any other strange issues I've had with MTronic I'll add them here.

As stated in the video, I had a brand new 362 MTronic last fall that had a defective white solenoid. First bad one I’ve seen, new or old, and I work on this stuff everyday. I swapped out each piece of the MTronic system one piece at a time, in sequence from the coil to the throttle position...

I did this video a few years ago when the black solenoids were discontinued but still available online and documented everything. The video is a little lengthy but done as fast as I could in real time. Nowadays if you’ve got a 201tc with a coil that’s still V1, upgrading to V3 on the coil and...

I'm waiting for the four slice model to do some mods on.....

I'll send it to ya Boss. Shipping should be pretty reasonable as this version is significantly lighter.

Here’s my .02 on Duke’s

That thing is an absolute time capsule and a very early 10mm. I think it falls into the category of "it's only original once". That being said, pack that piece of junk up and send it to Taylors, SC and I'll give it a proper burial.

Hole in the tank to boot. WTH????

Customized bar on an 084

The non-flat top/decomp that for some reason the Red Light doesn’t work for $1100 https://www.ebay.com/itm/296128396075