qurotro's latest activity
-
qurotro replied to the thread HUSQVARNA HUSQVARNA THREAD.Dropped on the ground. -
qurotro replied to the thread HUSQVARNA HUSQVARNA THREAD.It would still pay for itself and I would run it if it was mine.
-
I built a hybrid 346xp with a trashed cylinder and it runs pretty darn good. I wouldn't hesitate to use that , but I'd smooth up the...
-
I have owned 81 chainsaws so far in my life
-
I think the thick-ring 2101-style piston is the best for overall usability. @srcarr52 is the expert on these - He's talked about how the...
-
New thin ring setup,
-
qurotro reacted to Maxchaos's post in the thread Husqvarna 550 Mark 2 keep destroying bearings with
Like.
Here we go guys, don't know if it's because the bearing have the cage destroyed,but the crank is VERY stiff to turn,seem almost like a... -
qurotro reacted to Motorka's post in the thread Husqvarna 550 Mark 2 keep destroying bearings with Like.
Buy new short block ....
-
I think they made the change at the same time. From what I’ve seen, at least. If an NE has a orange clutch cover on it, it was probably...
-
You need one of these
-
That to bad Bill. I hate seeing change. Those buildings are history and should stay there.
-
Lee, I fully trust your knowledge on that as I have never tried to order any nor have I used parts tree. I know it is just a matter of...
-
One of the notable considerations is parts availability. There is no doubt that the 1201 is a nice saw but you will play hell getting...
-
I'd recommend a 3120XP
-
I've built both. The 1201 is a better built saw. Both need mods to increase the RPM limit.....but the 881 has a terrible oil pump drive...