president's latest activity
-
Ppresident reacted to davidwyby's post in the thread SELLING Husky 61/266/268/272 full wrap adapter blocks with
Like.
Batch of 18 done. I am off work sick, going to count up how many we need and we will make more if need be. -
Ppresident reacted to davidwyby's post in the thread SELLING Husky 61/266/268/272 full wrap adapter blocks with Like.
It should, yes. Same tank, etc. Manuel should be making chips on these very soon!
-
Ppresident reacted to Czed's post in the thread SELLING Husky 61/266/268/272 full wrap adapter blocks with Like.
Here's what a 266 wrap block looks Like if you're interested in Expanding your product line. Hopefully some wraps will start being...
-
Ppresident reacted to cuinrearview's post in the thread Best compression tester for small engines? with Like.
The compression testers for small two strokes need to have a shrader type valve at the very end of the hose. This eliminates the above...
-
PDid you run the saw stock before putting a cylinder on it? Something isn’t right with it if it just stalls out that easily, also is saw...
-
PDo you use a raker/depth gage to adjust them accordingly ? Stock chain out of the box usually runs in the mid .02's for raker height...
-
PYou don't necessarily need the key it is just for easy reinstall. You can just line it up where the key should be and tighten it down...
-
PMine has vented caps and a plug where a regular vent would go. I plan on using a sealed fuel cap and adding a generic vent. Ran pressure...
-
PThat's what I hoped my problem was. Mine somehow keeps oiling the bar when it isn't running. Siphoning or something.
-
PI found this...
-
Ppresident replied to the thread Husqvarna 2100 thread.It has to be the 3 dog aluminum pulley . the 298, $ 285 had the 2 dog style and wont work on yours
-
PI had a guy weld my 461 tab up. Been 5 or so years ago. Chap has since passed. RIP Rocketnorton. Then CFB ported the saw,, its probably...
-
PWheely a lot
-
PThe late pro series has the intellicarb self compensating carb. I believe the only difference in the tanks would be the vent style...
-
Ppresident reacted to Squareground3691's post in the thread SOLD Husqvarna / Husky 298xp PARTS ONLY!!!!!! Runs perfect!!! with Like.
The 298 has a plastic 2 pawl design flywheel cover, the 2100/2101 were aluminum with a 3 pawl design flywheel covers, that was the...