president's latest activity
-
Ppresident replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.I believe the square grinder attachment has been NLA for years
-
PJust so happened to check the crank for play on my 266xp. Slight radial play. Time for bearings.
-
Ppresident replied to the thread Grinder Comparison Thread.I rerad a discussion on the chainsaw grinder thread 6 months ago and it should be there.It states that for 3/8 the T/_ should be used...
-
PSeveral people ask how to maintain consistent filing angles, when the chain cutters don’t have ‘witness marks’. Some file holders have...
-
Ppresident reacted to Woodslasher's post in the thread The giveaway thread 20/21/22/23/24/25 with
Like.
Free, just cover the ride. #1 is a used stock filter and filter cover for a 500i, no knob for the cover. No cracks that I saw, but there... -
Ppresident reacted to singinwoodwackr's post in the thread WANTED Complete-ish Stihl 064 or early short cased 066 with Like.
Well, pulled a couple of the 1122 bins down today…been a while… For 064s, I don’t have but 1 complete saw and a semi complete second. 🙄...
-
Ppresident reacted to Yukon Stihl's post in the thread WANTED Complete-ish Stihl 064 or early short cased 066 with
Haha.
It is to finish off the cut if the saw dies -
PI would imagine that the initial investment in tooling (lathe, hand pieces and bits etc etc) needed to do this type of work can be...
-
PI think your plan is sound. I've been doing my Tacoma transmission about every 50k and that's worked well. The truck now has 330K and...
-
Ppresident replied to the thread Grinder Comparison Thread.usg, with cbn and use new angles as per the updated sheet . Its the primo grinder!
-
PStihl USG here, as my main grinder. Bought from a member and once I got used to the thing going the opposite direction of the Oregon 520...
-
PFile or grind off the sharp points and run it. Besides, that looks like a flat top, no decomp and those are pretty scarce. The best 066...
-
Ppresident reacted to Khntr85's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
How you like that stihl grinder, I got one input cbn wheel on I love it!!
-
PI chose an 026. You can find them complete and in good shape for less than $350. Fixer uppers under $150. That era of Stihl is easy to...
-
Ppresident reacted to jacob j.'s post in the thread 372 sputters when tipped, passes spray test with Like.
Have you checked the intake boot for cracking?