president's latest activity
-
Ppresident reacted to Duce's post in the thread 372 sputters when tipped, passes spray test with
Like.
372's oe or xt are easy to tear down and do complete rebuild. Clean every part, check carb screen, check bearings, base gasket (had one... -
Ppresident reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Flexible, meaning something that can change size depending on throttle position. There’s vacuum inside the crank case and intake boot...
-
Ppresident reacted to EFSM's post in the thread 372 sputters when tipped, passes spray test with Like.
Yes the seal will be leaking, but chain tension will have a lot more to do with crankshaft position than saw orientation will. They do...
-
Ppresident reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...
-
Ppresident reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
026 failing the tip test is more likely fuel pooling in the intake and in the lower transfer ports. L screw needs to be leaned out a...
-
Ppresident reacted to EFSM's post in the thread 372 sputters when tipped, passes spray test with Like.
Maybe a weird gasket leak on the carburetor metering chamber? Use an ether can with a straw for checking for air leaks. Maybe that’s...
-
PI’ve already used a feeler gauge shim and extra-high strength thread locker in a pinch. It’s not like you have to do something special...
-
PA 272 cover will fit a 288 as well, I bought a 181 with a 272 cover on it and it had the same ugly gaps at the back. I highly doubt...
-
PCorrect ! The key word here is modify! A 288xp cover will have the brake flag waaaay too close to the handlebar!
-
PI think it's a 440 cylinder. The fins don't look right for 046/460.
-
PIt looks like he was skirting the rules for selling by advertising in the chainsaw forum rather than the trading post/chainsaw ads...
-
PHas anybody had any luck with this seller? We know he replies within minutes direct messaging before you send the payment, provides his...
-
P"...We're gonna need a bigger bench..."
-
PThe tecomec was under $20 to my door and it improved the flow considerably, even with the deflector attached - You can run without it...
