president's latest activity
-
Ppresident reacted to Woodslasher's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
I think Stihl proprietary bearings are made by F A G typically, fwiw. -
Ppresident reacted to sergiyshariy's post in the thread Chain Service Tools and Sharpening Station with Like.
-
Ppresident reacted to sergiyshariy's post in the thread Chain Service Tools and Sharpening Station with Like.
Perhaps the esteemed stihl #1 has friends in Germany who could tell me why the USG machines have a vertical shift of 3 degrees, which...
-
Ppresident reacted to HumBurner's post in the thread HELP! How to know when you have too much hook with Like.
This is how I often will deal with cutters that are rocked bad. Instead of making tons of strokes with the appropriate file, I'll grab a...
-
Ppresident reacted to old saw fixer's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I used to install the bearings on the crank first, the heat the pocket and drop the crank/bearing assy in. Put the gasket on that side...
-
Ppresident reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Ok I'll give that a shot. I realized I was careless when hammering on the crank, and damaged the threads slightly... smart guy! I'll...
-
Ppresident reacted to jacktheripper's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Only thing else I’d like for it is a new west coast style large clutch cover!
-
PPorted is the freebase form of chainsaw. You'll probably never recover. What model?
-
Ppresident reacted to lehman live edge slab's post in the thread SELLING Stihl 20" guide bar - Rollomatic ES - Made in Canada with Like.
Yes it’s an Oregon has the greasable tip also, I know for awhile there was some law stating all companies had to buy a certain...
-
PThe saw with the Mahle looks like it was having a hard time breathing lol...
-
PIt would be interesting to know how much wear the piston skirt has. Did you measure it? It can sometimes be hard to tell if you’re...
-
PHey guys. I’m throwing a new walbro HD16 on the 460. I always start with 1 turn out on high and low. I always get the high setting right...
-
PFirst off don’t do anything to muffler till you make sure the carb is a fully adjustable one. If it doesn’t have a wt-194 with both high...
-
Ppresident reacted to hacskaroly's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Yeah, I thought if I ever got a MS 170, one of the first things I would do would be to put an adjustable carb and a side mount tensioner...
-
PI use aviation form-a-gasket (Permatex) for gaskets (both sides), I think I have the red permatex I use with clamshells. If you have...
