pbillyi69's latest activity
-
Bought myself a few new power tools today, also getting another 2 x 6ah batteries in the mail. -
pbillyi69 replied to the thread Husqvarna 390 Short Block.how did it work?
-
We got the Disston back together and running on prime. I didn't want to mess with the crusty fuel tank and filter so this is as good as...
-
For the curious... As received 2 bolt on cyliders Mark
-
Disston DA211. I've had this saw for over 5 years and I decided it was time to get it cleaned up so I can put it in the display...
-
Chains to grind and a abused ax head with a cracked eye to weld and reinforce. I haven't looked at the chains yet, but knowing who used...
-
I finished putting the Orline powered generator back together. Mark
-
Echo 7310 came in with low compression. It still ran fine but it didn’t idle well after getting warm. Both piston ring locator pins had...
-
Based on the Orline/O&R/Ohlsson & Rice engines, drill and generator. Drill came from Bob Anderson and generator from Steve Corrio...
-
pbillyi69 replied to the thread So what did you buy today.ten years is pretty good
-
Two deep cycle battery's for the RV. Old ones were dated 2016 I guess the solar charger keeps them up nicely. Trailer rarely get plugged...
-
Do the cannon bars still just take yer common 1 rivet oregon nose? If so, there's quite a few new old stock .404 ones in ebay right...
-
Well, I called Cannon and they admitted to having a bad batch of tips. They're going to be sending me a new one. That's as good as...
-
No judgements here. Im glad yer ok. I understand how shocking it is milling with that much power when something grenades right in close...
-
Was told my camera had a telephone in it.
