pavel408's latest activity
-
Roll cage going in the race car - '72 Javelin for the 24 Hours of Lemons. -
I'm not a moderator here. And I don't feel welcome anymore. So, I'm out. What I need to do is figure out how to get out of here without...
-
pavel408 reacted to mainer_in_ak's post in the thread HELP! Help with first time porting Echo 800P with
Like.
True that! The going rate for a used 8000 or 800 is $400. I guess some of the ebay sellers didnt get the memo though. Whats surprising... -
Saw fired right up again this morning. I'm chalking this up to condensation in the tank. I should have refueled when I quit, That way...
-
Did some freehand ripping today. Easier than expected. Normal chain
-
pavel408 reacted to srcarr52's post in the thread HELP! Help with first time porting Echo 800P with Like.
My right angle handpiece will work with the Dremel Fortiflex motor as it's a key drive cable just like the Foredom and all the imports...
-
I agree with the polished aluminum transfer sitch. It’s happened to me. Do the acid on the Qtip method all around the ex port. I’d...
-
-
pavel408 reacted to farminkarman's post in the thread HELP! Help with first time porting Echo 800P with Like.
I've never ported a cs800p, so I don't have any specific info to share. I can make some suggestions though. For starting out, don't...
-
pavel408 reacted to huskihl's post in the thread HELP! Help with first time porting Echo 800P with Like.
Hard to do without the proper tools, but I would raise the upper transfers a bunch more than I raised the exhaust. I’ve never done an...
-
pavel408 reacted to srcarr52's post in the thread HELP! Help with first time porting Echo 800P with Like.
I took 0.030" from the squish band when I did this 800P, then I had to raise the transfers 0.125" to get the transfer duration I wanted...
-
They’ve clearly been doing some work with acoustics. Most of the newer Stihls have baffles the twist the exhaust after it exits the...
-
-
-
