High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

OnlyStihl's latest activity

  • O
    OnlyStihl replied to the thread Another welder.
    2 AWG copper. https://opeforum.com/threads/another-welder.31212/post-1655541
    • 1748528730587.png
  • O
    OnlyStihl replied to the thread Another welder.
    I ordered a 90 amp breaker for the metered box, and at the same time will install the 60Amp on the welder circuit in the garage. All...
  • O
    OnlyStihl replied to the thread Another welder.
    Sounds wild. Is this it? :D
    • 1748523480870.png
    • 1748523549103.png
  • O
    OnlyStihl reacted to Al Smith's post in the thread Another welder with Like Like.
    As far as the plugs I've usually used range plugs which I think are 50-60 amps .However they do make plugs that are over100 amps but my...
  • O
    OnlyStihl replied to the thread Another welder.
    I know. Just seems radical going from 60 to 90. But if the wire can handle it, then why not. BUT if all that being true why was the...
  • O
    OnlyStihl reacted to Al Smith's post in the thread Another welder with Like Like.
    Now then that machine that blows the breaker .My old Marqette is as old as I am .As such the transfomer windings had bare conductors and...
  • O
    OnlyStihl replied to the thread Another welder.
    Is this a limiting factor? 50 amp welding plug 6-50p. What is the next step-up plug for Amps greater then 50?
    • 1748438137813.png
  • O
    OnlyStihl reacted to lehman live edge slab's post in the thread Another welder with Like Like.
    Why would you only put a 70-80 amp in if your wire is sized for 90? Makes no sense to not wire to capacity going into the garage...
  • O
    OnlyStihl reacted to Al Smith's post in the thread Another welder with Like Like.
    That old machine might have something that came loose inside .My old Marqutte I have at my house,that came over on the Mayflower ,multi...
  • O
    OnlyStihl replied to the thread Another welder.
    Dedicated 50 Amp for the welder in the garage. Garage has a 60 Amp from the metered box. So I've 10 Amps of juice surplus if the...
  • O
    OnlyStihl replied to the thread Another welder.
    I did pull the panels off and didn't see anything amiss. Something to look at again, but after I try lower hanging fruit. I do have a...
  • O
    OnlyStihl replied to the thread Another welder.
    If it happens again, I'm replacing the breaker.
  • O
    OnlyStihl replied to the thread New Tool -- Angle Grinder Stand Kit.
    Lots of 4 wheeling.
  • O
    OnlyStihl replied to the thread Another welder.
    Something is off. That's why I ran some beads with the settings high. The freezer is very old and very large. It was free many years...
  • O
    OnlyStihl replied to the thread New Tool -- Angle Grinder Stand Kit.
    With the angle grinder the number of attachments is greater. Also angle grinders are low cost. Not sure what a belt sander costs. I'm...
Show older items
Top