OnlyStihl's latest activity
-
OOnlyStihl replied to the thread Spray painting. Rattle Can vs. Paint Spray Air Gun.With the trailer, pretty isn't the goal. It's nearly 25yo and used primarily to get firewood. But it does seem a good candidate to...
-
OOnlyStihl reacted to Wilhelm's post in the thread Spray painting. Rattle Can vs. Paint Spray Air Gun with
Like.
I "brush" everything, seems to get a nice thick layer with little waste in a single pass. Not too pretty visually though. -
OOnlyStihl reacted to hacskaroly's post in the thread Spray painting. Rattle Can vs. Paint Spray Air Gun with Like.
I guess it all depends on what you are spraying and how much you are spraying. Correct that with a spray gun you can mix to your color...
-
OOnlyStihl replied to the thread Spray painting. Rattle Can vs. Paint Spray Air Gun.Lots of good things to think about. For small parts having a toaster oven in the garage... :thumbsup: I have to replace the wood deck...
-
OI have used my HVLP Spray Gun a modest amount. Mostly for oiling the log cabin. I've got quite a bit of things I need to get painted...
-
OOnlyStihl replied to the thread Drill Bit sharpening jig.I got them fast. No problems at all.
-
OOnlyStihl replied to the thread Drill Bit sharpening jig.I kinda wish I had known about this -> Ordered mine. Lots and lots of the smaller ones, i.e. the ones that are more difficult to...
-
-
OOnlyStihl replied to the thread Another welder.I pulled the panel off to inspect, blow clean, and lube anything I could find. Looks like I have the Power Factor Capacitor/Condensers...
-
-
OOnlyStihl replied to the thread Another welder.I did modify a Riding Mower trailer hitch that was about 1/4 in thickness. The support brackets were too long which pitched the entire...
-
OThat 120 v welder is probably 130 amp or so and you actually would have no problem multi pass welding 1/2” plate with it and 35...
-
OOnlyStihl replied to the thread Another welder.I have a 120V Flux Core Forney welder. It gets used on metal 1/8 and less. That and above the Arc welder gets called. I'd like to...
-
OThe welder is still putting out roughly the same amperage as the older one but buzz box style welding machines have very low starting...
-
OYou can view however you want but multi pass is a thing on thicker metals. Is one pass over the other on a piece of 1/8” steel going to...
-
OOnlyStihl replied to the thread Another welder.IMO, you get one pass to fuse the two core work pieces together. Piling on additional metal over a previous pass does little. Consider...
-
OOnlyStihl replied to the thread Another welder.Built the platform with the Husky casters. 350lbs is a lot of weight to get atop of the platform. Ladder, a 4:1 game hoist, and the...
-
