Olds120's latest activity
-
We got the Disston back together and running on prime. I didn't want to mess with the crusty fuel tank and filter so this is as good as... -
On the way
-
For the curious... As received 2 bolt on cyliders Mark
-
Disston DA211. I've had this saw for over 5 years and I decided it was time to get it cleaned up so I can put it in the display...
-
I finished putting the Orline powered generator back together. Mark
-
Echo 7310 came in with low compression. It still ran fine but it didn’t idle well after getting warm. Both piston ring locator pins had...
-
Based on the Orline/O&R/Ohlsson & Rice engines, drill and generator. Drill came from Bob Anderson and generator from Steve Corrio...
-
Cleaned up the new addition. Had the parts to throw some west coast trim on it. Still waiting on a carb kit.
-
Fixed.
-
MS200t. I made a temporary rod by cutting and bending a piece utility flag wire.
-
I got it together. The bearings have a teeny tiny bit of radial play. I read some conflicting opinions regarding the amount of...
-
-
Olds120 replied to the thread What's on your bench?.I did my 1st piston swap today. I did it on a Husqvarna 261with a 262xp meteor piston/caber ring. Modded the oem muffler after soaking...
-
-
Cleaning parts...201t carcasses... Pretty colors, no? Even the rollers are blue, lol Well, that was 2 days ago :p Today...helped an...
-
Im whooped and it’s cold so I figured I’d buff some stuff. Buffer grinder came out of the scrap pile with the wheel already on it.
