old guy's latest activity
-
It will work as long as the area involved has a little bit of "meat" to it to make a couple few threads. Being a tank and not a... -
old guy replied to the thread Fixing hole in tank.I've had great sucsses with JBWELD.
-
Shining a flashlight into the tank, there is luckily no corrosion inside of the tank. There is just a very minimal amount on the bottom...
-
old guy reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with
Like.
The way I took your first post it sounded more like the average was 24" not 6-8" 261 with carb of choice will get it done. -
old guy reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
If majority are 6-10” cedars the 261 is plenty fine and a bigger saw won’t even seem that much faster honestly. Even a 24”+ won’t make...
-
old guy reacted to Bill G's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The 261is the best choice for the job.
-
old guy reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Thanks for replying. I definitely thought about going bigger, but I need to prioritize maneuverability and stamina. Are thinking not...
-
Awesome info here, I'm a little behind as I scored a near perfect 372XPG with heated half and full wrap and got distracted. Will...
-
old guy replied to the thread Cheap scored 357XP.After that I constantly check the wheel before I take another measure. I hate learning the hard way but it does stick.
-
old guy replied to the thread Cheap scored 357XP.I did that too this year, an old but good 372 cyl, problem was the degree wheel moved (operator error). Good thing I had two new OEM...
-
old guy replied to the thread Cheap scored 357XP.I've done a few that way, 372 or 390 clamp.
-
Randy really set a standard of generosity here, with information, spare parts, or whatever. I like to think that I learned a little from...
-
Randy was notoriously generous with porting numbers. In fact, he poasted 357 numbers in numerous threads. Right there in broad daylight...
-
We definitely have some clever boffins here, and they're mostly generous with their advice.
-
old guy replied to the thread Cheap scored 357XP.Early this year I put together a 359 cyl. on a 357 bottom, I inquired here about porting #s and stuff and pretty much followed advice...