MustangMike's latest activity
-
MustangMike replied to the thread Part Six: The Exhaust System.Since we have no way to measure it, there is no way for us to know if you are correct or not. Nice theory though. However, I'll go... -
MustangMike replied to the thread Show off your muffler mods.Exactly, that is why headers have collectors, and tubes of the right length and diameter. Conversely, Funny Cars and Rails generally do...
-
MustangMike reacted to Powerstroke Cowboy's post in the thread Show off your muffler mods with
Like.
Indeed, but, even an engine with valves benefits from a well tuned exhaust. Cam profile affects that as well. Thats another rabbit... -
MustangMike replied to the thread Show off your muffler mods.A properly ported saw will usually create power at higher RPMS and will need a less restrictive exhaust ... it is about matching...
-
A simple way to think about it is the muffler outlet restricts flow. If you open it larger than another restriction in the saw, you’ve...
-
And, what are the differences between ported and non ported saws when it comes to muf mods?
-
We might have to take this to a different thread because it’s a legitimate debate: Is back pressure valuable, or is it only helpful if...
-
The bark box style covers have a pretty good deflector setup even though they are a front port. In general, they are just too damn loud...
-
MustangMike replied to the thread Show off your muffler mods.I will respectfully disagree. I've discussed this with porters who are far more knowledgeable than I am. A hole in the front of the...
-
At some point they merely get LOUDER. My SLR muffler PS-7310 was a pig stock, tuned to shy of 12.8k rpm! I disliked running her, I got...
-
MustangMike reacted to Redbull661's post in the thread 661 muffler mod progression w/thermocouple with Like.
Did this back on Dec 1st when it was still warm. Now that it's -22 and I don't want to go outside... This is a completely stock 661...
-
Yeh, no issues with the two Zamas I've had on my ported 044. Randy must've gotten into a bad batch. Thought the ES Light looked good...
-
MustangMike replied to the thread Saw video thread.Love it, my 10mm 044 is one of my favorite saws. Randy did one heck of a job on that saw! Mine is not ported, but it almost runs like...
-
-
MustangMike reacted to legdelimber's post in the thread Post up your ported cylinder Artwork with Like.
Like Lehman says, it adds up. We always figured about .017 per inch of distance, for one degree out of square. I milled tapered bars...
