MustangMike's latest activity
-
MustangMike reacted to srcarr52's post in the thread Post up your ported cylinder Artwork with
Like.
Trace the exhaust port opening onto the piston skirt with a pencil so you can see the shape better. -
MustangMike reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
I absolutely love seeing guys get into this stuff. Anytime you need advice on anything....don't hesitate to reach out.
-
Thanks for all the advice. I'll do a little trimming on those corners and run it a little to see how it feels. I've read through a...
-
MustangMike reacted to farminkarman's post in the thread Post up your ported cylinder Artwork with Like.
+1 @MAF143 Definitely don't need that much arc in the exhaust roof, and as Randy said, try to tighten up the upper corners on the...
-
MustangMike replied to the thread Post up your ported cylinder Artwork.See how it runs, but some of my 660s (w/o Husky pistons) seemed to like the Exhaust at 96-98 and the intake at 82-83. I was told by...
-
MustangMike reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
A few tips....if you don't mind. Look at the top of the intake port in relation to the piston skirt and ring. Most likely you can...
-
MustangMike reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
Variable speed rheostat. Set it to whatever speed you want.
-
All good pal. I’ll give you a holler soon.
-
Over the years, there were two different shades of orange. ( I have a husky with three different shades on the same saw from the...
-
MustangMike reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
Sup my friend ?!?!?!?
-
Yes. Chicken legs + foot control = no bueno Moobs.
-
MustangMike reacted to Mastermind's post in the thread Post up your ported cylinder Artwork with Like.
Speaking of Dremel.... My feet hurt. Sometimes, they hurt bad. now....WTF has this got to do with a Dremel? Welp.....I use a Foredom...
-
MustangMike reacted to David Young's post in the thread Post up your ported cylinder Artwork with Like.
There are porters that I admire and can ask questions or bounce idea off. then on Facebook and youtube every jack ass with a Dremel is...
-
I started the saw for the first time the other day, it doesn't sound as "snotty" as my 066 with a bark box.
-
MustangMike replied to the thread CLEARCUT meets the 500i.Should be loud, but it will be interesting to see how much it improves cut times. On some 660s sometimes too much open muffler reduces...