MustangMike's latest activity
-
MustangMike reacted to Mastermind's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with
Like.
Dear sir. You are seriously overthinking this. Sincerely, Randy -
MustangMike reacted to huskihl's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
1 16 ounce cup is the smaller case and the 24 ounce cup is the bigger case. When you push the 16 ounce cup into the smaller cup, more of...
-
MustangMike reacted to huskihl's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
I look at primary case compression like this… Grab 2 16 ounce solo cups and a 24 ounce solo cup. Put 16 ounces of water into a 24 ounce...
-
MustangMike reacted to stihl #1's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
You would need a slo mo camera since 10,000 RPM is 166 revs per second. Even at idle speed of 3000 RPM that is 50 revs per second. All...
-
MustangMike reacted to drf256's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
I believe the optimal case to displacement ratio is 60-70% IIRC. One also has to remember that displacement in a 2T motor is defined...
-
I see you don't make a living doing muffler mods. LOL
-
Looks great, hard to believe 346 mufflers are NLA
-
The Bubba LLC
-
MustangMike replied to the thread 034 Super Build.Great stuff Al, the 360 you did for me puts a smile on the face of anyone who runs it, fantastic power to weight, and it has compression...
-
I remember watching a video of Al running one of his MOFO 034S jobs in a chunk of hardwood bigger around than my mother-in-law with a...
-
Was hoping to fire it up today and run it, but we got snow last night, and all the wood is buried. Stay tuned.
-
Had one last thing to fix. Workmanship still matters to me. Saw is being sold, but I like to treat mine the same.
-
Good to know. I have some 1128 parts saws, but no runners.
-
Bearing same. The MS360 drum is actually deeper than the 1128 drum. Using an 1128 drum will cause the oiler gear to not engage unless...
-
Yes ID is the same OD is bigger, 10 X 16 X 12 vs 10 X 13 X10. The kit has the rim washer and clip too. The 066 is 10 X 16 X 13. The...