MtnHaul's latest activity
-
MMtnHaul reacted to PA Dan's post in the thread DIY first cut rails for small logs around 14" diameter? with
Like.
The logest log so far was around 8'. Didnt see any sag in it. Boards are flat. -
MMtnHaul reacted to Sloughfoot's post in the thread DIY first cut rails for small logs around 14" diameter? with Like.
Yeh, bay area is a busy place. I can see why folks live there because the summer weather is fantastic and there's a lot of high paying...
-
MMtnHaul replied to the thread Oil questions....What's most notable about the tests done back in 2007 is that the baseline fuel used for the test was much, much worse than the baseline...
-
MMtnHaul replied to the thread DIY first cut rails for small logs around 14" diameter?.I just noticed you're in NorCal. I've spent some time up there and if my work was easy to relocate I would prefer to be up there. I...
-
MMtnHaul reacted to Sloughfoot's post in the thread DIY first cut rails for small logs around 14" diameter? with Like.
Never had to plane one straight. There was always a perfectly straight untwisted one to be had. Do have to keep an eye one them...
-
MMtnHaul replied to the thread DIY first cut rails for small logs around 14" diameter?.Oh I like that a lot. With the 11' setup do you ever support the middle or is there zero flex with the 2" square tube?
-
MMtnHaul reacted to PA Dan's post in the thread DIY first cut rails for small logs around 14" diameter? with Like.
I had these cut from 1/4" thick steel plate and have 2" square tube that goes in the slots. Have two 11' and two 6' for different size...
-
MMtnHaul replied to the thread Oil questions....Kind of like an OTR truck driver needs to care about their engine oil and someone like myself who drives less than 10k miles per year...
-
MYou know what I find funny? The guys most obsessed with oil have never wore out a saw or any other OPE in their lives. Sometimes they...
-
MMtnHaul replied to the thread DIY first cut rails for small logs around 14" diameter?.I guess 2x6 selection at the lumber yard will make or break the results. Did you ever plane the boards or otherwise mitigate the...
-
MMtnHaul reacted to Sloughfoot's post in the thread DIY first cut rails for small logs around 14" diameter? with Like.
I always built my rails out of straight 2x6 when I was milling. Short ones screwed to each end level and the rails screwed to outside...
-
MThe crusty gym sock in the laundry. Most disgusting part of a mother's day.
-
MWell,....I gonna have to ask for a sock stipend then.
-
MFrom time to time I come across some logs that I would like to mill into beams for outdoor projects such as stairs, garden beds, small...
-
MYou don't like oil threads yet your first post is to fan the flames in an oil related pissing match?