Recent content by Mooselegs

Could someone tell me if there is a Specific Method in Installing the Little Impulse Grommets on a Husqvarna Model 55 Cylinder which are Adjacent to the Carb Intake, Can you use a Light Oil to Install These of will Oil Attack the Rubber/Plastic Grommet

Could you Possible Advise which Color Possible to use (In an Type or Shade of Orange) & What Product you would Suggest in the Rit Dye. Also, Method of Application of Dye. Never Tried Dye Before & as the Part id Plastic of some Kind, Not Sure How to Do It

I am Rebuilding a 1991 Vintage Husqvarna Model 55 Saw for my Son. I know this will bring some Flack from some of the People on this Site Saying "Why Bother, Its a Chainsaw" but I figured i'd give it a Shot anyway. My Model 55 is a Black Top/Grey Top Non Rancher, Non Air Induction Type Saw and...

Could someone Help me to Properly Identify a 1991 Model Husky 55 Crank. my Shop was Broken into During Christmas & altough i had all my Saw Parts Boxed & Marked found everything all over the Place

Would you Possibly have any 65/65L or 55 Model Husky Parts?

I am Rebuilding an Older 65 Model Husqvarna. Will the Bearing fit over the Bushing that looks to be almost Ecentric the the Magneto Rides on or can this Bushing be Removed, the One Right behind the Keyway in the Crankshaft on Magneto Side

Thank you Very Much. Don't Know Compression at this Point as Saw was in Pcs when i Got it but as soon as I Check the Gaps/Tolerances & Assemble i will Certainly Check Compression. Any Ideas what a 1991 Husky 55 Should be in Terms of Compression?

Thank You for the Information

Could someone tell me what the Acceptable Cylinder Tolerance Measurement is on a Husky 65L Model Saw Between Cylinder & Piston as well as Ring Gap measurement. I realize that there are Different Measurement between Cylinder & Piston at Cylinder Skirt & Top of Cylinder where Spark Plug Hole is...

Could someone Advise if a 1991 Model 55 Husqvarna c/w: a Black/Gray Top Cover came with a Gray Colored Top Handle Wrap on Carrying Handle? Just Wondering if it is an Aftermarket Handle or if OEM Made these at some Point

Hope these Help, I'm in the Process of Stripping this Saw and Trying to Restore it

I Have a Husqvarna 65L Chainsaw but can't Seem to Find Information on Exact Model (Or Sub Model) Based on Tag on Saw. It is a Silver Tag above Fuel Filler Cap at Rear of the Saw and Shows: Husqvarna 65L - TOMOS Made in...

Exactly Keith, my other 3-4 Swedish Made 65 Model come apart with not to much Difficulty. I removed one of the Bolts and a Spacer of Sorts and the Threaded Rod which seem to be Aluminium pushed right Through allowing me to Remove the Handle Assembly. on the 65L Tomos it is Stuck in somehow. I...

Could anyone let me know if there is any real Difference Between an OEM Decomp. Valve Assembly for a Husky Model 55 (1991 Year) c/w: 46mm Cylinder Assembly & an Aftermarket one? Also, I have read quite a Bit these Decomp. Valve Assemblies are Not that Great so if not, What is Required to Plug...

Could yo tell me what Condition the L65/77 Muffler is in & Maybe also send me a Picture. Also the 46mm Pistons for the 55 Rancher shown in the Box