High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

mikeyb's latest activity

  • M
    mikeyb reacted to hacskaroly's post in the thread br-350 hard to pull rope with Like Like.
    Have you rotated the crankshaft to different positions (TDC, BDC...etc) and reinstalled the plug and see if it rotates at all, or does...
  • M
    mikeyb reacted to hacskaroly's post in the thread br-350 hard to pull rope with Like Like.
    Just so I understand, it pulls hard at TDC with the plug out? Have you sprayed some WD-40 or put any 2-stroke oil in the cylinder to...
  • M
    mikeyb reacted to redneckhillbilly's post in the thread br-350 hard to pull rope with Like Like.
    when the flywheel sheered, could it by chance have damaged any of the starter pawls or is the recoil possibly binding up?
  • M
    mikeyb reacted to EFSM's post in the thread br-350 hard to pull rope with Like Like.
    I’ve never seen a forged rod bend. I have seen Stihl’s stamped rods bend and cause strange cranking issues. You’re sure nothing is...
  • M
    mikeyb reacted to Shane¹'s post in the thread br-350 hard to pull rope with Like Like.
    How did you get the flywheel off? Maybe if you taped the crank it needs to be recentered?
  • M
    mikeyb replied to the thread br-350 hard to pull rope.
    yes, oem parts, bore scope didn't see anything and doesn't bind without plug installed. probably tear down after hitting the lake today...
  • M
    mikeyb replied to the thread br-350 hard to pull rope.
    pulling fine and dandy with plug removed . not rubing recoil and pawls are good, thinking now rod related to hard stop, was hoping to...
  • M
    mikeyb replied to the thread br-350 hard to pull rope.
    seems to be at tdc .even installed shorter plug to make sure wasn't hitting. just had a thought , scary but could the hard stop have egg...
  • M
    mikeyb posted the thread br-350 hard to pull rope in The Repair Shop.
    originally came to me locked up, found flywheel sheared due to backed out coil screw. replaced coil and flywheel. now can't pull to...
Show older items
Top